Table of Contents
Advertisement
POWER SUPPLY CHARACTERISTICS
POWER MODES
Konftel 70 supports different power modes to save power. The following power
modes are available:
•
Hibernate mode. The speakerphone consumes negligible power. Konftel 70
waits for its activation. The white power LED indicator is off.
•
Idle mode. Konftel 70 works on battery, USB power or DC power. In this case
the speakerphone is in operation but it has no Bluetooth
•
Standby mode. Konftel 70 receives power from the battery, USB power or DC
power connections. It has Bluetooth
•
Active operation mode. Konftel 70 works on battery, USB power or DC power
connection. There is an active call or music playing on the speakerphone.
Entering the idle power mode from the hibernate mode
Use this procedure to enter the idle power mode from the hibernate mode on your
Konftel 70.
Make sure that the speakerphone is switched on and it is in the hibernate mode.
Note that the white power LED indicator is off in the hibernate mode.
•
To enter the idle mode, do one of the following:
•
Press the
Off Hook
•
Connect the USB cable.
•
Connect the power adapter cable.
The phone enters the idle mode, and the power mode LED becomes white.
•
To return the speakerphone to the hibernate mode, do one of the following:
•
Press the
Off Hook
•
Have 30 minutes of inactivity with only battery power consumption.
The phone enters the hibernate mode, and the power mode LED turns off.
Entering the standby power mode from the idle mode
Use this procedure to enter the standby power mode from the idle mode on your
Konftel 70.
Make sure that your Konftel 70 is in the idle mode.
®
or USB connection but is not active.
button for 2 seconds.
button for 2 seconds.
20
®
or USB connections.
Advertisement
Table of Contents
