Connection To A Pc; Bridge Connection - Konftel 300M User Manual

connecTion To a Pc

 Connect the Konftel 300M to a computer using the USB cable provided.
Check that Konftel 300M Usb audio is selected as the sound unit in the

computer's settings.
Use as a conference unit
When connected to a PC, the Konftel 300M functions as a conference unit for VoIP
calls, which means that speakers and microphones are activated, as is advanced sound
management in OmniSound
button.
VoIP (Voice over IP) calls are transmitted as data packets over the network/Internet. For
calls via PCs, you need VoIP software (e.g. Microsoft OCS or Skype
web meetings whereby several users can communicate and share documents via their
web browser or special client software.
Some VoIP software has automatic adjustment of microphone and speaker levels
as standard. In certain situations this can produce a pulsating sound or cause
problems with full duplex. In such cases, switch off the automatic level regulation
if possible, and set the software manually to a suitable microphone level, allowing
Konftel 300IP to manage sound processing.

bRiDGe connecTion

As default, the sound via the mobile network and USB is bridge-connected. It is
possible to turn off the bridging if you do not want any sound from the computer to be
heard during mobile calls.
 Press the line MoDe button.
Select bridging to be enableD or DisableD and confirm by pressing oK.

Mini Usb port for
Pc connection
. The microphone can be turned off using the
®
GeneRal
(Mute)
) or a service for
®
9