Receive Mode Settings; Ring Delay; F/T Ring Time (Fax/Tel Mode Only) - Brother MFC-9560CDW Basic User's Manual

Receive Mode settings

Ring Delay

The Ring Delay setting sets the number of
times the machine rings before it answers in
Fax Only and Fax/Tel modes.
If you have external or extension telephones
on the same line as the machine, keep the
Ring Delay setting of 4. (See Easy Receive
on page 36.)
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 1.
21.Setup Receive
1.Ring Delay
03
a
04
b
Select ab or OK
c
Press a or b to choose 00, 01, 02, 03 or
04 for how many times the line rings
before the machine answers.
Press OK.
d
Press Stop/Exit.
Note
Choose 00 in step c to have the machine
answer immediately.
F/T Ring Time
5
(Fax/Tel mode only)
When somebody calls your machine, you and
5
your caller will hear the normal telephone ring
sound. The number of rings is set by the Ring
Delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T ring
it means that you have a voice caller on the
.
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. (For more information see
Using Remote Codes on page 43.)
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 2.
21.Setup Receive
2.F/T Ring Time
a 20 Secs
30 Secs
b
Select ab or OK
c
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
d
Press Stop/Exit.
Receiving a fax
5
5
.
35