Sending A Fax; How To Send A Fax - Brother MFC-9560CDW Basic User's Manual

4

Sending a fax

How to send a fax

The following steps show how to send a fax.
a
When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in blue.
 The LCD shows:
01/01/2011 15:00
Fax Only
Dial & Start
b
Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the automatic
document feeder (ADF) on page 26.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 27.)
Note
To send color faxes with multiple pages
use the ADF.
28
c
Set the scanner glass size, fax
resolution or contrast if you want to
4
change them.
For more advanced fax sending
operations and settings, see Sending a
fax in Chapter 3 of the Advanced User's
Guide:

Broadcast
 Duplex Scan (2-sided fax layout)

Delayed Fax

Batch TX

Real Time TX

Polled TX

Overseas Mode

Fax Resolution

Contrast
 Coverpg Setup (Coverpage
Setup)

Coverpage Msg
d
Choose one of the options below:
 If you want to send a single-sided
document, go to Step e.
 If you want to send a 2-sided
document, press Duplex.
Note
• You can send 2-sided documents from the
ADF.
• When the machine is ready to scan
2-sided documents the LCD shows
Duplex in the lower right corner.
e
Enter the fax number using the dial pad
(up to 20 digits), a One touch key or
a Speed Dial and enter three-digit
number.
4
for