Table of Contents
Advertisement
Setting items
Progressive Mode
Auto : The video signal is automatically detected and the appropriate
Set an appropriate
mode is set.
progressive conversion
Video : Select mode suitable for video playback.
mode for the source video
Video and Film : Select mode suitable for video and 30-frame film
signal.
material playback.
This item can be set when "i/p Scaler" is set to anything other than
CBL/SAT
DVD
"Off".
GAME z
Blu-ray
MEDIA PLAYER z
AUX
TV AUDIO z
Aspect Ratio
16:9 : Output at 16:9 aspect ratio.
Set the aspect ratio for the
4:3 : Output at 4:3 aspect ratio.
video signals output to the
"Aspect Ratio" can be set when "i/p Scaler" is set to anything other
HDMI.
than "Off".
CBL/SAT
DVD
GAME z
Blu-ray
MEDIA PLAYER z
AUX
TV AUDIO z
NETWORK
z "GAME", "MEDIA PLAYER" or "TV AUDIO" can be set when "COMP"
assigned.
Volume Display
Sets where to display the master volume level.
Setting items
Volume
Bottom : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
DVD
Setting details
(vpage
109) has been
Default settings are underlined.
Setting details
107
Info Display
Displays status of operation temporarily when the sound mode is changed, or input source is switched.
You can set whether or not to show each of these status displays.
Setting items
On-screen Info
On : Turn display on.
Off : Turn display off.
Audio Display
Sets how long each menu is displayed when the input source is "NETWORK", "iPod/USB", or "FM".
Setting items
Audio
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
Off : Turn display off.
TV Format
Set the video signal format to be output for the TV you are using.
Setting items
Format
NTSC : Select NTSC output.
PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
3 seconds.
"NTSC" appears on the display.
2. Use the main unit's
format.
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Video
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
ZONE SOURCE
STATUS
and
for at least
SOURCE SELECT 0 1
and set the video signal
STATUS
to complete the setting.
Advertisement
Table of Contents
