Lexmark T656 Technical Reference Manual page 49

Byte Field name
8 Bar/Space Width
Units
9-10 Bar Width #1
11-12 Space Width #1
13-14 Bar Width #2
(Wide)
Type Range
int 0=default
(1/600" units)
1=1/300"
units
2=1/600"
units
3=1/1200"
units
[int int] 12-24 (dec) or
00 0C-00 18
(hex)
[int int] 12-24 (dec) or
00 0C-00 18
(hex)
[int int] 27-72 (dec) or
00 1B-00 48
(hex)
Note: The
range of
values for Bar
Width 2 is
dependent on
the value of
Bar Width 1,
where, Min =
2.25 x Bar
Width 1 Max
= 3 x Bar
Width 1
One-dimensional bar codes
Default value Description
• 0 or 2 (dec) Optional.
Specifies units for Bar and Space
or
widths.
• 00 or 02
(hex)
• 12 (dec) Optional.
Note: Values that go beyond the
or
defined range will be appropriately
• 00 0C (hex)
clipped and set to the minimum and
maximum values.
The default bar code engine ITF-14
narrow bar width is 0.02 inches. If
byte 5 is default 00 (600 dpi), then
the Bar Width (Narrow) is 00 0C
(hex) or 12 (dec).
• 12 (dec) Optional.
Note: Values that go beyond the
or
defined range will be appropriately
• 00 0C (hex)
clipped and set to the minimum and
maximum values.
The default bar code engine ITF-14
narrow space width is 0.02 inches. If
byte 5 is default 00 (600 dpi), then
the Space Width (Narrow) is 00 0C
(hex) or 12 (dec).
Note: The Optional.
default value
Note: Values that go beyond the
for Bar Width
defined range will be appropriately
2 is
clipped and set to the minimum and
dependent on
maximum values.
the value of
Bar Width 1,
where, Default
= 2.50 x Bar
Width 1
46