Arguments For One-Dimensional Bar Codes - Lexmark T656 Technical Reference Manual

Arguments for one-dimensional bar codes

Key Type
/Symbology name
/Units
/Height integer
/QuietZone [int int]
/Bars [int int int int]
/Spaces [num num num num]
/EmbedText name or
[name name]
/FontName name
/Pitch [int]
1
For the French postal symbology, /Special and /PrintCheckChar are always true and cannot be changed to
false.
Definition
Required, see "Values for /Symbology key" on page 72 for valid
values
Optional, default is 1/600 inch. Other valid values are 1/300,
1/1200, and 1/720 inch, which also applies to height and width
units for any 1-D symbology.
Optional, in /Units, default based on symbology, see "Values for /
Symbology key" on page 72
Optional, in /Units, default is [150 150]
Optional, in /Units, default based on symbology, see"Values for /
Symbology key" on page 72
Optional, in /Units, default based on symbology, see "Values for /
Symbology key" on page 72
Optional, default based on symbology, see "Values for /
EmbedText key" on page 75.
only
Optional, see "Values for /FontName key" on page 75; default is
Courier-Bold
Optional, used only by PostNet5, PostNet9, and PostNet11 bar
codes.
Allowed values are 20 through 24. Values less than 20 result in a
pitch of 20, values greater than 24 result in a pitch of 24. Default
is 22.
Arguments for one-dimensional bar codes
[array] used by ISSN and ISBN
70