Task 2 - Configuring A Print Server - Lexmark T656 User Manual

Configuring a
Print Server
AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server
Task 2 -
SCS/TNe emulation printing requires a MarkNet internal print server
or a Standard Network port on the printer.
A. To check the installed print server firmware version
1
2
3
From a Ready state touch Menus.
Touch Reports.
Scroll until one or more of the following appears. If none of
these appear, then you do not have a Standard Network or
internal print server installed.
a
If Network Setup Page appears, touch it. This prints the
Standard Network Card menu settings page.
b
If Network # Setup Page appears, touch it. This prints a
settings page for the internal print server in slot #, where # is a
number representing the slot in which the print server is
installed.
58