Lexmark T656 User Manual page 241

Operations - TN5250E SETUP: SCS OPTIONS > PAPER SETTINGS > Page Width (IDB Opt.84 & 85)
Parameter 2:
Value in inches [0.00 .. 45.51] or centimeters [0.00 ..
115.60] with 2 decimals
User IDB language to set factory default:
&%IDB_EDIT: PAGWDT I 8.27:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 84:132: OPTION 85:46:EXIT
The option values for option 84 and 85 are calculated using the for-
mulas below.
×
Width inch 1440
85:
---------------------------------------------- -
256
84: ( ×
Width inch 1440
nearest whole number.
The values stored in option 84 and 85 for a page width of 8.27 inch
are found like this:
×
8.27 1440
85: ≈
------------------------------ -
46
256
( × )
84:
8.27 1440 –
N : Inches can be converted to centimeters by multiplying with
OTE
0.3937 inch/cm.
Reduce to nearest whole number.
) ( ×
– 256 Value stored in option 85
( × ) ≈
256 46 132
) Round off to
243