Configuring Connection To An Smtp Server; Managing Licenses; Finding The Host Id - Lexmark C792 Administrator's Manual

Monitoring and maintaining the system

Configuring connection to an SMTP server

1
Click the Services tab.
2
Select Email from the Services list.
3
Select Parameters from the Tasks list.
4
Type the password and user ID used to log on to your SMTP server.
5
Type the e‑mail server connection timeout in seconds. The default is 60.
6
Type the e‑mail server host name or IP address.
7
Enter the e‑mail server I/O timeout in seconds.
8
Click Apply.

Managing licenses

Finding the host ID

Each license file installed on the server is associated with a host ID on the server, which is the physical address (MAC
address) of a network adapter in the load balancer without hyphens or other punctuation. During installation, the host
ID is shown by clicking Activate and Download License File(s). If you do not have access to the installation files, or if
you have multiple host IDs and want to determine which is associated with the network adapter connected to the same
network as your printers, then do following:
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type cmd.
3
Press Enter, or click OK.
4
From the command prompt window, type ipconfig /all, and then press Enter.
5
If you want to use the host ID associated with the network adapter connected to the same network as your LDD
system, then determine the correct network adapter using the description and IP address.
Note: The host ID of any listed network adapter is appropriate for creating license files as long as the associated
network adapter remains in the server. However, using the host ID associated with the network adapter
connected to the same network as your LDD system may help avoid future confusion.
6
Write down the physical address shown with the selected network adapter, removing the hyphens, and store it in
a safe place for use as the host ID in the Lexmark Licensing Portal.
48