Details - Lexmark T656 User Manual

Appendix - COR/APO Logic (TN5250e): Details
is assumed that no STO commands are present in the data stream
from the system. The STO commands always take priority over the
automatic controls of the printer.

Details

The following points refer to the flowchart in the end of this appen-
dix.
1
The calculation of the page format is based on information
found in the FCB.
These two measures are compared with values set in the
PAGLNG
Length (IDB Opt. 82 & 83)" on page 240
Width (IDB Opt.84 & 85)" on page
specify the maximum valid page size.
page width (inches) =
page length =
and option settings. Refer to section
PAGWDT
Example:
Use an A4 page format as valid page.
characters per line
-------------------------------------------------------------------- -
characters per inch (pitch)
line per page
------------------------------------------------- -
lines per inch (LPI)
and to section
242, which together
"Page
"Page
288