Selecting A New Value As A Setting - Lexmark T656 User Manual

Selecting a New Value as a
Understanding the Operator Panel: Printer operator panel
When you select an option, you will always be alowed to scroll
through the list of values presented. Numerical entries can be done
either by scrolling or by using the numeric pad.
Several examples of how to use the operator panel to select and
store new values are shown below. The section
Value as a Setting" on page 12
two sections discuss slight differences.
User-selected default settings remain in effect until you save new
settings or restore the factory defaults. All saved options become
active on the next host session.
To select a new value
Setting
1
Navigate to the SCS/TNe MENU as explained in
operator panel" on page
2
Use the navigation buttons
desired menu and press Select.
3
Use the navigation buttons to scroll further to reach the item
you need and press the Select button. Navigate in the same
way to the desired value and press the Select button.
"Selecting a New
shows all details, while the following
11.
or to scroll to the
"Printer
12