Power Connections; System Fan Assembly; Removing The System Fan Assembly - HP Xw6600 - Workstation - 2 GB RAM Technical Reference Manual

Power connections

To ensure proper power supply connections to drives and powered components, refer to the following
diagram.
Figure 4-24
Table 4-5 Power supply cable connection guide
Item Component
A Power supply
B Main power
connector
C Processor power
connector
D Auxiliary power for
PCI Express card

System fan assembly

This section describes how to remove the system fan assembly.

Removing the system fan assembly

To remove the system fan assembly:
1. Disconnect power from the system (see
2. Remove the side access panel (see
ENWW
Workstation power supply cable connections
Item
E
F
G
H
Component
Auxiliary power for PCI
IEEE 1394 or audio card
Optical drive 1
Optical drive 2
Floppy drive
Predisassembly procedures on page
Side access panel on page
Removing and replacing components
Item Component
I Hard drive number 1
J Hard drive number 2
K 4–pin style connector (white) power
harness
L SATA-style connector (black) power
harness
52).
58).
73