Removing And Replacing Components - HP Xw6600 - Workstation - 2 GB RAM Technical Reference Manual

Table 4-3 System board components (continued)
Item Component
6 Processor 1 fan
connector
7 Second processor
(XU2)
8 Memory fan power
connector
9 Processor 2 fan
connector
10 Diskette drive
connector
* Electrically x4 bandwidth

Removing and replacing components

This section provides procedures to remove and install hardware components on your workstation.
1. Read all safety information and precautions.
Before servicing your workstation, review the safety information and precautions in
considerations on page
2. Locate and clear a suitable work area.
3. Power down the workstation and disconnect power from the workstation.
4. Gather your tools.
5. Service the workstation.
6. Restore power to the workstation.
54 Chapter 4 Removal and replacement procedures
Item Component
16 Clear CMOS button
17 Front USB connector
18 Internal USB connector
19 IDE (PATA) connector
20 battery
48, and the Safety and Regulatory Information for your workstation.
Item Component
26 PCI 32 slot
27 PCI 32 slot
28 PCIe x16 (75W) slot
29 PCIe x8 (4) slot * (open-
ended slot that also
allows installation of
x16 card )
30 PCIe x16 (75W +) slot
Item Component
36 Three USB receptacles
37 Two USB and one RJ45
LAN receptacle
38 PS/2 mouse and
keyboard jacks
Service
ENWW