HP Vectra VE 6/xxx - 8 Maintenance Manual page 51

7 Connect the power and data cables to the rear of both the new drive
and the existing drive, if you have not done so already. The
connectors are shaped to fit one way only. If you are not sure which
connectors to use, refer to "Connecting IDE Devices" on page 36.
Hard disk data
cable
8 Ensure that the data and power cables are neatly routed so that they
do not interfere with any other device nor hinder the PC's cover.
9 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
10 Verify the new configuration by viewing the summary screen (press
while the Vectra logo is displayed during system startup).
2 How to Install Accessories in Your Minitower PC
Installing Mass Storage Devices
Power Cable
English 41