HP Vectra VE 6/xxx - 8 Maintenance Manual page 23

7 Connect the power cable and the data cable to the rear of the new
hard disk drive. Remember to replace those for the floppy disk drive
and the existing hard disk drive also.
The connectors are shaped to go in one way only. If you are not
sure which connector to use, refer to "Connecting IDE Devices", on
page 8.
Hard disk drive
data cable
8 Ensure that the data and power cables are neatly routed so that they
do not interfere with any other device nor hinder the PC's cover.
9 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
10 Check the new configuration by viewing the summary screen (press
while the Vectra logo is displayed during system startup).
1 How to Install Accessories in Your Desktop PC
Installing Mass Storage Devices
Power cable
English 13