HP Vectra VE 6/xxx - 8 Maintenance Manual page 31

6 Align the board's connector with the slot's socket and firmly press
the board into the socket. Do not bend the board. Ensure the board's
connector engages completely with the socket and does not touch
components on other boards.
7 Secure the board by replacing the retaining screw. If you loosened
any of the retaining screws on adjacent slots, remember to tighten
them.
8 The accessory board may need a special connection, such as:
Network cable to the WOL (Wake On LAN) connector.
•
Sound cable to the CD-ROM drive.
•
The following figure shows the location of the WOL connector.
WOL connector (already
connected for models with
a preinstalled LAN card)
For more information, refer to the documentation that came with
the accessory board. The necessary cables are usually provided with
the accessory board.
9 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
1 How to Install Accessories in Your Desktop PC
Installing Accessory Boards
English 21