HP Vectra VE 6/xxx - 8 Maintenance Manual page 45

To install a main memory module:
1 Disconnect the PC's power supply cord and any connection to a
telecommunications network.
2 Remove the PC's cover.
3 If necessary, remove the power supply unit and airflow guide.
4 Slide the memory module into the slot's socket at 90
board (the module will only fit into the socket one way round).
5 Firmly press the memory module completely into the socket until
the retaining clips click into position.
If you need to remove a main memory module, release the retaining
clips and pull the module out of the socket.
6 Install any other accessories before replacing the power supply unit
and airflow guide (if you removed them earlier) and replacing the
cover. Reconnect all cables and power cords.
7 Check the summary screen to verify the new configuration (To see
the summary screen, press
during system startup.)
2 How to Install Accessories in Your Minitower PC
while the Vectra logo is displayed
Installing Memory
o
to the system
English 35