HP Vectra VE 6/xxx - 8 Maintenance Manual page 17

To install a main memory module:
1 Disconnect the PC's power supply cord and any connection to a
telecommunications network.
2 Remove the PC's cover.
3 Slide the memory module into the slot's socket at 90
board (the module will only fit into the socket one way round).
4 Firmly press the memory module completely into the socket until
the retaining clips click into position.
If you need to remove a main memory module, release the retaining
clips and pull the module out of the socket.
5 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
6 Check the new configuration by viewing the summary screen (press
while the Vectra logo is displayed during system startup).
1 How to Install Accessories in Your Desktop PC
Installing Memory
o
to the system
English 7