Keyboard Mapping - HP T5145 - Thin Client - Tower User Manual

VT Series Emulations

Keyboard Mapping

The keyboard is mapped as close as possible to the terminal being
emulated. The mapping of key functions can be determined by refer-
ring to the list box in the dialog,
Emulation Keys Key Macro Settings
which is displayed by selecting on the menu.
Key Macros... Tools
The information in brackets in the right column indicates the default
mapping of the key function named in the left column. In the list, S+
indicates the Shift key, C+ indicates the Control key and A+ indi-
cates the Alt key.
For example:
VT_F20 (A+VK_F10)
indicates that the F20 function is mapped to the key combination Alt
+ F10.
The keyboard has operating two modes, Normal or DEC. You can
toggle between the two modes by pressing the keys Alt + Num
Lock together. The 9th item on the status bar will display DEC
when the keyboard is in DEC mode.
Special key functions usually found on a DEC VT keyboard can be
mapped to any key on your keyboard using the VT virtual key
names listed in the dialog.
Key Macro Settings
The illustrations on the following pages show where DEC VT510
keyboard functions are mapped to keys on a 101/102 key keyboard.
Keyboard Mapping 83