HP T5145 - Thin Client - Tower User Manual page 111

This can be set to a maximum of 64. Note that the number of rows
stored in memory is specified by the
Buffer lines
Factory default: 144
This option determines the number of text rows that are stored in
memory. This can be set from 0 to 528 rows by default. The
option specifies the number of memory rows that can be
Rows
viewed in the workspace at any one time.
Lines per page
Factory default: 24
When TeemTalk is in VT420 mode, the display memory of 144 lines
can be divided into several pages, up to a maximum of six pages of
24 lines each. The setting of this option determines the number of
lines on a page and therefore how many pages are available. Note
that the page size can be larger than the
which case you can scroll the page up or down in the window by
holding down the Ctrl key and pressing the Up or Down Cursor
keys. When TeemTalk is in any mode other than VT420, the page
size is the same as the
Columns per screen
Factory default: 80
This option enables you to specify a width of 80 or 132 columns for
the workspace. When set to
option determines whether all 132 columns are displayed using
Font
a narrow font, or only 80 columns at a time using the normal (80 col-
umn) font, with the ability to scroll horizontally to view the remain-
ing columns.
Columns per page
Factory default: 80
This option specifies the width of display memory for DEC VT
modes, in the range 80 to 132 columns. When the number of
Buffer lines
Lines per screen
setting.
Lines per screen
, the setting of the
132
VT Series Emulations
option.
Display
setting, in
Use 80 Column
Col-
Setup Options 95