HP T5145 - Thin Client - Tower User Manual page 168

IBM 3151 Emulation
152 Setup Options
Forcing insert
Factory default: Both
This option specifies how an insert command affects displayed data
when the screen is full.
When set to , you will not be able to perform an insert operation.
Off
When set to , you will be able to insert one or more lines, using
Line
the key for example. The contents of the current and all fol-
Ins Ln
lowing lines will move down the number of lines inserted, causing
the lines originally at the bottom of the display to be discarded.
When set to
Character
characters in the current line. Characters to the right of the cursor
position will move along. If the
characters originally at the end of the current line will be discarded.
If set to , characters on all following lines will move along,
Yes
forcing characters at the end of the last line to be discarded.
When set to , the function of the
Both
will be enabled.
Insert character
Factory default: Space
The setting of this option determines the effect of pressing the
key.
When set to , a space character will be inserted after the
Space
current cursor position.
When set to , the emulation will enter Insert mode when the
Mode
key is pressed.
Insert
Tab operation
Factory default: Field
The setting of this option determines whether tab stops are according
to field attribute characters or column-tab definitions.
, you will be able to insert one or more
Auto Wrap
and
Line
option is set to , then
No
settings
Character
Insert