Tab Settings - HP T5145 - Thin Client - Tower User Manual

VT Series Emulations

Tab Settings

104 Setup Options
Use 80 column font
Factory default: Unchecked
When this option is checked, the font used in 132 column writing
mode will be the same as that used in 80 column mode.
Backspace = DEL
Factory default: Unchecked
The setting of this option determines whether or not a backspace
command performs a delete.
Clicking the
Set Tabs...
dialog will display the
Settings
you to set tab stops for the DEC VT, ANSI and SCO Console
emulations.
Tab stops are set every eight columns by default, as indicated by the
T character below the relevant column numbers. If you want tab
stops to be set at regular intervals other than every 8th column, enter
the number of columns required between each tab stop in the box
next to the
Set Every
Individual tab stops can be toggled on or off by clicking the mouse
pointer above or below the relevant column number.
To remove all the tab stops, click the
To save the current tab stops, select
button at the bottom of the
Tab Settings
button, then click the button.
Clear All
Save Session
VT Series
dialog which enables
button.
in the menu.
File