Using The Teemtalk Emulator Window - HP T5145 - Thin Client - Tower User Manual

Using the TeemTalk
Emulator Window
If you want a shortcut icon for this session to be created on the
8
desktop, check the box labelled
.
session
Click to create the session and exit.
OK
9
To run the session, either double-click on the desktop icon if one
10
was created for the session, or run TeemTalk, display the
menu and select
.tts session file then click
This section describes the procedure for creating a Wyse emulation
session from the TeemTalk emulator window.
Display the
Session
1
to set the transport method.
Transport...
Display the
Session
2
connection method.
Display the
Session
3
emulation to
Wyse
You can configure the transport, connection and emulation set-
4
tings by selecting the relevant
menu. The
Emulation mode
dialog as described in the section "Setup Options" on page 256.
To save the session, display the
5
. In the
sion as File Name
identify this session configuration for future selection, then click
. Note that session files have the filename extension .tts.
Save
To run the session, display the
6
. Select the name of the required .tts session file then click
sion
.
Open
Create icon on desktop for
. Select the name of the required
Open Session
.
Open
menu from the menu bar and select
menu and select
menu and select
.
Configure
is specified in the
menu and select
File
field, enter a unique name that will
menu and select
File
Creating a Wyse Emulation Session
Wyse Emulations
to set the
Connection...
. Set the
Emulation...
options in the
Session
Wyse Settings
Save ses-
Open Ses-
File
251