Verify Wmi Mapper Service With Http Connection - HP Rx2620-2 - Integrity - 0 MB RAM Manual

similar to the following should result (the specific values will be different for each machine; if
obvious errors occur, you should uninstall and then reinstall the WMI Mapper component):
Instances of [Win32_ComputerSystem] (1 instances):
Instance of Win32_ComputerSystem:
{
AdminPasswordStatus = 3
AutomaticResetBootOption = TRUE
AutomaticResetCapability = TRUE
BootROMSupported = TRUE
BootupState = "Normal"
Caption = "FCTMARTIN"
ChassisBootupState = 3
CreationClassName = "Win32_ComputerSystem"
CurrentTimeZone = -420
DaylightInEffect = FALSE
Description = "AT/AT COMPATIBLE"
Domain = "DOMAIN-NAME"
DomainRole = 3
FrontPanelResetStatus = 3
InfraredSupported = FALSE
KeyboardPasswordStatus = 3
Manufacturer = "Hewlett-Packard"
Model = "HP Kayak PC"
Name = "HOSTNAME"
NetworkServerModeEnabled = TRUE
NumberOfProcessors = 1
OEMStringArray[?] = "SMBIOS 2.3 BIOS with HP DMI extensions "
PauseAfterReset = -1
PowerOnPasswordStatus = 3
PowerState = 0
PowerSupplyState = 3
PrimaryOwnerName = "Joe Owner"
ResetCapability = 1
ResetCount = -1
ResetLimit = -1
Roles[?] = "LM_Workstation LM_Server NT Server_NT Backup_Browser "
Status = "OK"
SystemStartupDelay = 30
SystemStartupOptions[?] = ""Microsoft Windows 2000 Server" /fastdetect "
SystemStartupSetting = 0
SystemType = "X86-based PC"
ThermalState = 3
TotalPhysicalMemory = 1341636608
UserName = "DOMAIN-NAME\jowner"
WakeUpType = 6
}

Verify WMI Mapper service with HTTP connection

This set of commands verifies that the WMI Mapper service is running and properly responding
to client requests. Note that running the nPartition commands with the -g option (to connect
remotely to the MP on the partitionable system) does not go through the WMI Mapper service,
so this test does not apply for those cases.
The following test uses a basic HTTP connection to the service, which eliminates any possible
SSL/certificate problems. By default, the WMI Mapper service is configured for HTTPS/SSL
connections only. Therefore this test will not work without first reconfiguring the service for
HTTP connections. See the installed file %PEGASUS_HOME%\ConfigREADME.txt for
instructions on how to configure the service. To test the default configuration (HTTPS connections),
you should skip this test and use the next one instead.
Open a Command Prompt window and run the following commands:
set CIM_HOST=localhost
108 Troubleshooting