Top Panel
The top panel is secured with two Torx screws. Removing it allows access to the webcam and allows
you to remove the main rear cover.
Figure 6-36
To remove the top panel:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the center access panel (see
3.
Remove the memory access panel (see
4.
Remove the drive access panel (see
5.
On the top of the computer, remove the two black Torx screws (1) that secure the top panel to
the computer.
6.
Rotate the top of the panel outward (2), and then lift the panel off the computer.
Figure 6-37
To replace the top panel, reverse the removal procedures.
Top panel location
26).
Removing the top panel
Preparing to Disassemble the Computer
Hinge Cover Panel on page
Memory Access Panel on page
Drive Access Panel on page
27).
29).
31).
Top Panel
51