Heat Sink Cover
The heat sink cover protects the heat sink and system board. It is secured with five Torx screws.
Figure 6-28
To remove the heat sink cover:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the center access panel (see
3.
Remove the memory access panel (see
4.
Remove the five black Torx screws that secure the cover to the computer.
Figure 6-29
Heat sink cover location
26).
Heat sink cover screws
Preparing to Disassemble the Computer
Hinge Cover Panel on page
Memory Access Panel on page
27).
29).
Heat Sink Cover
45