Webcam Module - HP Pro 4300 Maintenance And Service Manual

Webcam Module

The webcam module is located at the top of the computer beneath the top panel. It is secured with
two silver Phillips screws and has one connector.
Figure 6-38
To remove the webcam module:
1. Prepare the computer for disassembly (see
on page
2. Remove the center access panel (see
3. Remove the memory access panel (see
4. Remove the drive access panel (see
5. Remove the top panel (see
52 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Webcam module location
26).
Top Panel on page
Preparing to Disassemble the Computer
Hinge Cover Panel on page
Memory Access Panel on page
Drive Access Panel on page
51).
27).
29).
31).