Power Readings - HP BladeSystem bc2000 - Blade PC User Manual

Table 4-11 SNMP Configuration Field Descriptions—Community Strings and Trap Destinations Area
(continued)
Write Community
Add
Remove

Power Readings

The Power Readings screen provides power consumption estimates for the enclosure. This screen
includes the following fields:
NOTE: Power readings are shown only if the enclosure has a non-power-aware blade present. This
is a feature of HP BladeSystem bc2x00 Blade PCs only.
The screen may differ from the image shown here.
ENWW
Up to 20 characters including all
alphanumeric, dash, underscore, and
space characters
For the default read Community string,
see Factory Default Settings
on page 138.
Sets the SNMP write community string
If this is left blank, SNMP SET
commands are disabled.
For the default write Community string,
see Factory Default Settings
on page 138.
Adds an IP address to the list of trap
destinations.
Removes the selected IP addresses
from the list of trap destinations.
Enclosure Tab 27