User Account Commands - HP BladeSystem bc2000 - Blade PC User Manual

Table 5-2 General Management Commands (continued)
SHOW ENCLOSURE
POWER
* For event display severity policy-specific settings, these are session-specific only and were added to provide granular control
over a specific classification of event severity types.
●
SET DISPLAY EVENTS ENCLOSURE
◦ SET DISPLAY EVENTS ENCLOSURE ALL [ ON | OFF ]
◦
SET DISPLAY EVENTS ENCLOSURE CRITICAL [ ON | OFF ]
◦ SET DISPLAY EVENTS ENCLOSURE INFORMATIONAL [ ON | OFF ]
◦
SET DISPLAY EVENTS ENCLOSURE MAJOR [ ON | OFF ]
◦ SET DISPLAY EVENTS ENCLOSURE MINOR [ ON | OFF ]
◦
SET DISPLAY EVENTS ENCLOSURE NORMAL [ ON | OFF ]
● SET DISPLAY EVENTS BAY
◦
SET DISPLAY EVENTS BAY ALL [ ON | OFF ]
◦ SET DISPLAY EVENTS BAY CRITICAL [ ON | OFF ]
◦
SET DISPLAY EVENTS BAY INFORMATIONAL [ ON | OFF ]
◦ SET DISPLAY EVENTS BAY MAJOR [ ON | OFF ]
◦
SET DISPLAY EVENTS BAY MINOR [ ON | OFF ]
◦
SET DISPLAY EVENTS BAY NORMAL [ ON | OFF ]
For details concerning event classification see

User Account Commands

Table 5-3 User Account Commands
Command
ADD GROUP
<group name>
ENWW
Display power consumption estimates for the enclosure,
including all sub-components. This information includes
overall power consumption of the enclosure, as well as peak
power and time averaged power across a 24-hr-and-since
powered / reset interval.
Event Icons and Details on page
Description
Adds a group to the system
The default group description is blank.
This command provides only
estimated power usage based
on measurements reported
from power-aware blades and
estimates from enclosure
subsystem components. Use it
only as reference information.
NOTE:
when all blades are power-
aware (e.g., bc2x00) only. A
note is displayed indicating
that the enclosure cannot
accurately estimate power
consumption.
136.
Restrictions
Only enclosure administrators
may execute this command. A
maximum of 20 groups may
be added to the system.
The <group name> must be
unique to all other group
names and user names and is
case-sensitive. It must be
1-13 characters long and can
Operating the Command Line Interface
This is only displayed
53