Other Messages; Set A Paper To The Bypas Feeder.; Set Xx Roll Paper To The Roll Deck; Set A Paper To The Bypass Feeder - Kyocera KM-4800w General Operations Manual

3. 1. 3

Other messages

The following messages will be displayed according to the situation.
•

Set XX roll paper to the Roll Deck.

•

Set a paper to the bypass feeder.

•
Toner empty. Replace the toner cartridge.
•
In Warm Sleep Mode
•
In Power Save Mode
3. 1. 3. 1

Set XX roll paper to the Roll Deck.

When "Set XX roll paper to the Roll Deck" is displayed, set the roll paper of required size to the
Roll Deck.
("XX" stands for the paper width.)
Refer to [2.3 Replacement of Roll Paper] on page 2-4 for the way to set the roll paper.
3. 1. 3. 2

Set a paper to the bypass feeder.

When "Set a paper to the bypass feeder" is displayed, set a cut sheet paper to the Bypass Feeder.
Refer to [2.5 Set of Cut Sheet Paper to the Bypass Feeder] on page 2-13 for the way to set the cut
sheet paper.
3-14 Chapter 3 Error Correction