Connecting The Machine And Other Devices - Kyocera ECOSYS P4140dn Operation Manual

Installing and Setting up the Machine > Connecting the Machine and Other Devices

Connecting the Machine and Other Devices

Prepare the cables necessary to suit the environment and purpose of the machine use.
When Connecting the Machine to the PC via USB
When Connecting the Machine to the PC or Tablet by network cable, Wi-Fi, or Wi-Fi direct
NOTE
If you are using wireless LAN, refer to the following.
Configuring the Wireless Network (page 2-19)
Cables that Can Be Used
Connection Environment
Connect a LAN cable to the
machine.
Connect a USB cable to the
machine.
IMPORTANT
Using a cable other than a USB 2.0 compatible cable may cause failure.
USB
Network
Tablet
*1 Only for models with the optional Wireless Network Interface Kit (IB-36).
Function
Printer
Printer
2-6
Wi-Fi access point
LAN cable (10BASE-T, 100BASE-TX,
1000BASE-T)
USB 2.0 compatible cable (Hi-Speed USB
compliant, max. 5.0 m, shielded)
Network cable
connection
Wi-Fi
*1
connection
Wi-Fi Direct
*1
connection
Necessary Cable