Fax Transmission Functions - Kyocera FS-C2626MFP Operation Manual

Sending Faxes > Fax transmission functions

Fax transmission functions

Functions frequently used for transmission are shown at the bottom of the transmission screen. To show other functions,
press [Functions]. Use [] or [] to select the function.
Specify the original size.
Specify the correct original orientation.
Automatically scan 2-sided originals.
Set the resolution at which to scan originals.
Adjust the density.
Select original image type for best results.
Scan a large number of originals separately and then produce as one job.
Add a file name to the job to easily check its status.
Send notice by e-mail when a job is complete.
Specify a time for transmission.
Connect to the destination first and then scan the original.
Set up another transmission while communication is taking place.
Interrupt transmission and send another original.
Send an original using a sub address.
Initiate reception of a fax by controlling the receiving machine.
Encrypt an original to send it safely.
What do you want to do?
4-8
Reference Page

Original Size Selection page 4-9
Original Orientation  page 4-10
Duplex  page 4-10
Selecting the FAX Resolution
4-11
Selecting the Density  page 4-12
Selection of Original Image
4-12

Continuous Scan page 4-13
File Name  page 4-22
Job Finish Notice  page 4-21
Delayed Transmission  page 4-16

Direct Transmission page 4-14
Standby Transmission  page 4-19
Interrupt Send  page 4-20
Sub Address Transmission
6-23
Polling Communication  page 6-26

Encryption page 6-36
 page

page
 page