File Management Utility; Starting The Application; Add Devices; Adding Devices - Kyocera FS-6525MFP Operation Manual

Starting the Application

1
2
3

Add Devices

Adding Devices

1
2
3
4
5
1-1

1 File Management Utility

The File Management Utility (FMU) distributes documents scanned on a multi-
function print system (MFP) to specified network folders or computers. The user
can set the criteria for distributing the scanned files. Advanced distribution
criteria are available for certain MFPs.
If the application is not set to start automatically, you can start it manually.
Note: In Preferences in the main screen, you can set the application to start
automatically.
Open the application.
In the Windows system task bar, right-click the File Management Utility icon.
In the context menu, click Open FMU. If Open FMU is grayed out, restart File
Management Utility with administrator privileges.
Specific MFPs on a network can be selected for use with the application. Use
the Add Device Wizard to select devices by IP address or host name.
You can add devices for the application with the Add Device Wizard.
In the main screen, click Add.
In the Add Device Wizard, enter the IP address or the Host name of the MFP
you wish to add, and then click Add.
Enter another IP address or Host name if necessary. The devices you enter
appear in the list on the right.
Click Next.
In the Communication Settings page, specify the SNMP type (SNMPv1/v2 or
SNMPv3).
If you specify SNMPv1/v2, enter the Read community and Write
community for the MFP. The read community name for the device will be
used in requesting information, while the write community name is sent will
User Guide