Pc Health Status - Gigabyte GA-970A-DS3 User Manual

2-8

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Hardware Thermal Control
Reset Case Open Status
Case Opened
Vcore
DDR15V
+12V
+3.3V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN1 Speed
Current SYSTEM FAN2 Speed
Current POWER FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN1 Fail Warning
SYSTEM FAN2 Fail Warning
POWER FAN Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
System Smart FAN Control
: Move Enter: Select
F5: Previous Values
Hardware Thermal Control
&
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
Reset Case Open Status
&
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
&
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR15V/+12V/+3.3V
&
Displays the current system voltages.
Current System/CPU Temperature
&
Displays current system/CPU temperature.
Current CPU/SYSTEM/POWER FAN Speed (RPM)
&
Displays current CPU/system/power fan speed.
CPU Warning Temperature
&
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will
emit warning sound. Options are: Disabled (default), 60
CPU/SYSTEM/POWER FAN Fail Warning
&
Allows the system to emit warning sound if the CPU/system/power fan is not connected or fails. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
PC Health Status
[Enabled]
[Disabled]
No
1.424V
1.472V
11.985V
3.280V
36 C
o
39 o C
2360 RPM
0 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
C/140 F, 70
o o
- 34 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
C/158 F, 80 C/176 F, 90 C/194
o o o o o
F.
o