1-2
Product Specifications
CPU
AM3+ Socket:
-
-
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport
4800 MT/s
Bus
North Bridge: AMD 970
Chipset
South Bridge: AMD SB950
Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules.)
Audio
Realtek HD audio codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN
Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
Storage Interface
South Bridge:
-
-
USB
South Bridge:
-
Etron EJ168 chip:
-
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 4-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
AMD AM3+ FX processors
AMD AM3 Phenom
II processor/ AMD Athlon
™
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
* To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU
first.
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available
through the internal USB headers)
Up to 2 USB 3.0/2.0 ports on the back panel
- 8 -
II processor
™