2-4
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
Halt On
Base Memory
Extended Memory
: Move
Enter: Select
F5: Previous Values
Date (mm:dd:yy)
&
Sets the system date.
Time (hh:mm:ss)
&
Sets the system time.
IDE Channel 0, 1 Master/Slave
&
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your SATA devices by using one of the two methods below:
Auto
Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
None
If no SATA devices are used, set this item to
•
detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2 Master/Slave
&
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
Auto
Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
None
If no SATA devices are used, set this item to
•
detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), Large.
Capacity
Approximate capacity of the currently installed hard drive.
Halt On
&
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
Memory
&
These fields are read-only and are determined by the BIOS POST.
Standard CMOS Features
Wed,
Jan 4 2012
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
766M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 27 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
None so the system will skip the
None so the system will skip the