Gigabyte GA-970A-DS3 User Manual page 25

Write Recovery Time
&
Options are: Auto (default), 5T~8T, 10T, 12T, 14T, 16T.
Precharge Time
&
Options are: Auto (default), 4T~10T.
Row Cycle Time
&
Options are: Auto (default), 10T~56T.
RAS to RAS Delay
&
Options are: Auto (default), 1T~9T.
** DCTs Drive Strength **
ProcOdt(ohms)
&
Options are: Auto (default), 240 ohms, 120 ohms, 60 ohms.
DQS Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Data Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
MEMCLK Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Addr/Cmd Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CS/ODT Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CKE Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
** DCTs Addr/Cmd Timing **
Addr/Cmd Setup Time
&
Options are: Auto (default), 1/2T, 1T.
Addr/Cmd Fine Delay
&
Options are: Auto (default), 0/64~31/64.
CS/ODT Setup Time
&
Options are: Auto (default), 1/2T, 1T.
CS/ODT Fine Delay
&
Options are: Auto (default), 0/64~31/64.
CKE Setup Time
&
Options are: Auto (default), 1/2T, 1T.
CKE Fine Delay
&
Options are: Auto (default), 0/64~31/64.
Channel Interleaving
&
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
- 25 -