Load Fail-Safe Defaults; Load Optimized Defaults - Gigabyte GA-970A-DS3 User Manual

CPU Smart FAN Control
&
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different
speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system
requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled)
CPU Smart FAN Mode
&
Specifies how to control CPU fan speed. This item is configurable only when CPU Smart FAN Control is
enabled.
Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU

fan control mode. (Default)
Voltage Sets Voltage mode for a 3-pin CPU fan.

PWM Sets PWM mode for a 4-pin CPU fan.

System Smart FAN Control
&
Enables or disables the system fan speed control function. Enabled allows the system fan to run at different
speed according to the system temperature. If disabled, system fan runs at full speed. (Default: Enabled)
2-9

Load Fail-Safe Defaults

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PC Health Status

ESC: Quit
F8: Q-Flash
Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings.
In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable
BIOS settings for the motherboard.

2-10 Load Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PC Health Status

ESC: Quit
F8: Q-Flash
Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings.
The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults
after updating the BIOS or after clearing the CMOS values.
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Load Fail-Safe Defaults (Y/N)? N
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Load Fail-Safe Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Load Optimized Defaults (Y/N)? N
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Load Optimized Defaults
- 35 -
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS