Table of Contents
Advertisement
If the horizontal flickering, blur or bars appear, proceed to <Phase>
adjustment as follows.
(2) Horizontal flickering, blurring or bars appear on the screen.
Use the <Phase> (p. 44) adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or ars by
using the Right and Left Switchs.
NOTE
•Horizontal bars may not completely disappear from the screen depending on the
PC.
(3) The screen position is not incorrect.
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the number
and the position of the pixels are fixed. The <Position> adjustment moves the
image to the correct position.
Select <Position> and adjust the position of the upper left corner of the image
by using the Up, Down, Right and Left Switches in order to align the screen.
If vertical bars of distortion appear after finishing the <Position> adjustment,
return to <Clock> adjustment and repeat the previously explained adjustment
procedure. ("Clock"
2. Cable Connection and Screen Adjustment
"Phase"
"Position")
1
Hide quick links:
Advertisement
Table of Contents
