Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual page 54

Optional parameters
• Destination IP address
Configures the specified IP address as connection destination for all printer drivers
to be installed. However, if the Package File was created with "use current settings"
checked on the Port Setting, e.t.c. screen, the address configured at the time of file
creation is specified.
• Log file name
Specifies the name to which the log file will be renamed after the installation is
finished.
• Whether or not to reboot
Specifies whether to reboot the computer after the installation is finished or not.
• Window handler of destination of result notification
Specifies the window to which the result of the Silent Installation will be notified.
• Notification message ID
Specifies the message ID for notifying the result of the Silent Installation to the
specified window.
: space, [ ]: option, < >: required item, /:
Reboot command line
Package File name[
reboot][
Destination IP address
None
-P< IP address> or
-p< IP address>
IP address = nnn.nnn.nnn.nnn
Log file name
None
-L< "Log file name"> or
-l< "Log file name">
Whether or not to reboot
None
-R< Y/y/N/n> or
-r< Y/y/N/n >
Window handler of destination of
result notification
None
-W<Window handler> or
-w<Window handler>
*Window handler is written in
hexadecimal characters
3-6 Silent Installation
Destination IP address][
Window handler of destination of result notification][
Semantics
Sets the IP address specified in Setup.ini.
Sets the destination of connection of the printer driver to the specified
IP address.
Semantics
Uses the default (APDInstall.log).
After installation, renames the log file as specified.
*Sets the "winnt" folder as the log file's output path.
Semantics
Reboots after the installation is complete.
"Y" or "y": Reboots the PC.
"N" or "n": Does not reboot the PC.
Semantics
Does not notify the results of the processing by using the window
message.
Notifies the following processing results to the specified window
handler.
Notification parameters of the window message
WPARAM: 0 (Success), 1 (Failure), 2 (Execute uninstallation)
LPARAM: NULL
selection
Log file name][ Whether or not to
Notification message ID]
Rev.B