For Ethernet Interface; For Serial Interface - Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual

For Ethernet interface

When using the Ethernet interface, check that the TCP/IP protocol settings are configured in the
target PC. When not configured, register the TCP/IP protocol from [Control Panel] - [Network
and Internet Connections] - [Network Connections].

For serial interface

When using the serial interface, make sure the communication settings in the TM printer match
those in the printer driver. In the TM printer, the communication settings are performed using
the DIP switch. For details, see the TM printer user's manual.
2-4 APD Installation and Setup Rev.B