Download Print this page
Epson C6500P User Manual

Epson C6500P User Manual

Roll to roll system

Advertisement

Quick Links

USER MANUAL
Roll to roll system
for EPSON C6500P
:
this product is certified

Advertisement

loading

Summary of Contents for Epson C6500P

  • Page 1 USER MANUAL Roll to roll system for EPSON C6500P this product is certified...
  • Page 2 The Roll to Roll system specifically designed for Epson C6500P color label printer can handle rolls up to 220mm (8.66”) media wide and having an outside diameter up to 250mm (10”). Both Unwinder and Rewinder are equipped with a fixed 3” core holder. An external power supply 100/240VAC - 2.5A...
  • Page 3 STEP 4 Tighten the core through the knob and install the additional support. STEP 5 Keeping the media underneath the tension arm, turn on the unwinder and feed the media into the printer. Please look at printer’s user manual and follow the detailed procedure on how to load the media into the printer.
  • Page 4 STEP 8 Pull the printed media underneath both printer and label unwinder. STEP 9 Remove the additional support and the outer disk. Load the empty cardboard core onto the core holder. Slide in the outer disk onto the core holder and keep it close to the media edge.
  • Page 5 LABEL REWINDER ONLY INSTALLATION ATTENTION. The unit is equipped with an extension plate as default, for this configuration it is not required to be used. If you do not have the printer plate (JPL-6500P), place and align the rewinder behind the printer and than follow the instructions from STEP 3.
  • Page 6 STEP 4 Pull the printed media underneath the printer and under the tension arm. STEP 5 Stick the end on the cardboard core. Tighten the knob and install the additional support. STEP 6 Tighten the core through the knob. STEP 7 Once the media is loaded into the printer, slide left and right the unwinder to find the correct alignment between the two units and tighten...
  • Page 7 FUNCTIONING Label rewinder ON-OFF Push this button to turn On or Off the unit. INCREASE SPEED Push this button to increase the rotation speed. DECREASE SPEED Push this button to decrease the rotation speed. LABEL FACE-OUT Turn the unit off. Keep pushed “FACE OUT” button and push “ON-OFF”...
  • Page 8 smart solutions for the labeling industry Label rewinder, label unwinder, electronic label dispenser and more... - FOR MORE INFO CONTACT YOUR RESELLER -...