Restrictions Related to Installation
The following restrictions apply to an APD installation.
Coexistence with OPOS is not possible.
Restrictions apply if installing APD Ver.3.xx on a PC on which an older version (APD
Ver.2.xx) is installed. See the next section for details.
The APD for DM-D to install is different depending on the connection pattern when
installing the APD for DM-D on the same computer as the APD for TM Series. For details,
see the manual that comes with the "APD for DM-D."
Installation and uninstallation must be performed in the following order.
Installation
1. Install "APD for TM Series"
2. Install "APD for DM-D"
Uninstallation
1. Uninstall "APD for DM-D"
2. Uninstall "APD for TM Series"
The following or later versions of integrated package for TM-C100/TM printers/DM-D
customer displays must be installed when used together.
•
"TM-C100 Printer Driver"*1
•
"APD for DM-D"*2
•
"APD for TM Series"
*1 APD Ver.3.02 or later is integrated into the "APD for TM Series"
*2 The "APD for DM-D" package file to install is different depending on the connection
pattern. For details, see the manual that comes with the "APD for DM-D."
Installation must be performed in the following order.
1. Install the "TM-C100 Printer Driver"
2. Install the "APD for TM Series"
3. Install the "APD for DM-D"
The Windows shared printer function is not supported.
Some print servers can be used with TM-C100. For details, contact your dealer. Other TM
printers cannot use either commercial print servers or commercial print adapters.
The conditions for a USB connection are as follows.
USB cable no longer than 5 m, up to 5 cascaded hubs. Use USB cables and USB hubs
compliant with USB 2.0 standard.
The maximum number of printers that can be connected simultaneously through a USB
connection is 8.
Rev.B
Advanced Printer Driver Installation Manual
Ver.1.20.2 or later
Ver.3.01E or later
Ver.3.01aE or later
APD Overview 1-11