Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual page 28

8. If the printer driver selected in step 6. is "TM-C100," configure the following settings.
Port types
Status
Viewer
Port Type
• USB
• TCP/IP(Use Print Server)
Status Viewer
Configures whether to use or not the Status Viewer (EPSON Status Viewer Service).
For details, see "About the EPSON Status Viewer Service - TM-C100" on page 1-7 .
•Use
•Do not use Does not start the Status Viewer automatically at system startup.
2-10 APD Installation and Setup
Normally, use the USB port. When selecting the USB port, also configure the
Status Viewer settings.
The TM-C100 is a USB interface printer. However, if using Ethernet connection
through a print server, the following settings are necessary.
IP Address
The Status Viewer is grayed out.
Starts the Status Viewer automatically at system startup.
Enter the print server IP address.
TCP/IP settings
Rev.B