Color - Eizo FlexScan T965 User Manual

3-2. Color

By using the <Color Mode> in the <Color> menu, the adjustment mode can be
selected from standard mode (to set the color temperature, the color correction and
the color restration), custom mode (to adjust each color tone, (Red, Green and Blue))
and sRGB mode. These modes allow you to adjust the color settings according to
your preference.
<Standard> mode to set the color temperature, the color correction
and the color restration
(1) To set the color temperature
Temperature can be set from 4,000 K to 10,000 K, in 500 K increments.
(Including the 9,300 K default setting.)
(2) To eliminate disparities in color temperature and brightness due
to an irregular video signal output
Color Correction corrects irregular video signal output levels to eliminate
disparities in color temperature and brightness. Every time the PC
(graphics board) and input signal change, execute color correction.
(1) Open a www browser and the Pattern.html in the EIZO Utility Disk.
Then, maximize the window.
(2) Execute the <Color Correction>. All other adjustments are off during
the correction. (The operation takes about 20 to 30 seconds. Do not
change the "Pattern" during the correction.) When color correction is
complete, the result is displayed.
Set the <Temperature>.
Execute the <Color Correction>.
3. SCREEN ADJUSTMENT
15