Power Save - Eizo FlexScan T965 User Manual

3-4. Power Save

There are two power save settings. Choose the setting which matches your
environment.
Set the power saving setting by using <Others> menu.
• Do your part to conserve energy, turn off the monitor when you are finished using
it. Complete energy use can only be accomplished by disconnecting the monitor's
power supply cord from the plug receptacle.
To use the PC's power saving system (VESA DPMS
[Procedure]
(1) Set the PC's power saving settings.
(2) Select "ON" in the <PowerManager> menu.
[Power saving system]
PC Signal
ON
STAND-BY
SUSPEND
OFF
To use the Monitor's off timer system
Without the PC's power saving system, the off timer allows the monitor to enter
a powersave mode after a predetermined amount of time has lapsed.
[Procedure]
Select "ON" and press the left/right keys on the control pad to set the "On
period". (1 to 23 hours)
Press any direction of the control pad or to turn the power off then on again to
return to a normal screen.
[Power saving system]
Time
On period (1-23H)
Last 15 min. in"On period"
"On period" expired
* To delay entering the power save mode, press any direction of the control pad
during the advance notice mode. The monitor will continue to operate for an
additional 90 minutes.
18
3. SCREEN ADJUSTMENT
Select "ON" in the <PowerManager> menu.
Screen
Operation
Blank screen
Power save (Mode 1)
Power save (Mode 2)
Select "ON" in the <Off Timer> menu.
LED
Green
Green
Flashing green
Yellow
Screen
Operation
Advance notice*
Power save mode
p.31)
)
LED
Green
Flashing green
Flashing yellow