Eizo FlexScan T965 User Manual page 23

Problems
3. (The continuation)
4. The image is flickering.
5. Moiré patterns appear.
6. The characters and images
have a slight shadow on
their right side.
7. The characters and images
have several vertical bars
on their right side.
Points to check with possible solutions
Use of the <Moiré Reduction> adjustment may cause a
slight vibration. To eliminate the vibration, set the
adjustment level to lower percentage or 0%.
If the volume level of the EIZO optional i·Sound speaker
is too high, it may, in some cases, cause a slight
vibration. To eliminate, turn down the volume of the
speaker.
Flicker will occur with interlaced scanning, or non-
interlaced scanning with a low refresh rate. All EIZO
monitors are capable of reproducing high refresh rates
for non-interlaced scanning. If a problem occurs when
using a non-interlaced signal, try adjusting the graphics
board to increase the refresh rate (if possible). Refer to
the graphics board manual for information.
Reduce the moiré using the <Moiré Reduction>.
Change the horizontal and vertical size of the display
area.
Change the selected desktop or wallpaper pattern to any
solid color pattern. For detailed information on how to
change these patterns, refer to the PC and operating
system manual.
Change the mode of <Signal Filter 1>.
Change the refresh rate. Refer to the PC and graphics
card manual for information.
Adjust to decrease the vertical bars at the
<Signal Filter 2>.
5. TROUBLESHOOTING
23