2-2. Connecting the signal cable
NOTE
• Be sure that the Power buttons of both the PC and the monitor are OFF.
1.
Set up the monitor after unfolding the base of the stand.
NOTE
• How to adjust Angles of the Monitor
Grip upper side of the monitor firmly with both hands and adjust the
monitor angle as desired.
2.
Plug the signal cable into the connector at the rear of the
monitor and the other end of the cable into the video
connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (enclosed)
Signal Cable (enclosed) +
Macintosh Adapter (Optional)
Digital Input
Power Cord
FD-C04/ FD-C35 / FD-C39
(Optional)
NOTE
• The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector).
Power Cord
Signal Cable
Signal Cable
Connector
•
Video Output
Standard graphics card
Connector D-Sub
•
Macintosh G3 (Blue & White) /
mini 15 pin
Power Mac G4 (VGA)
•
Video Output
Macintosh
Connector D-Sub
15 pin
Connector
•
Video Output
Power Mac G4 (DVI)
Connector DVI
•
Digital graphics card
2. CABLE CONNECTION
English
PC
PC
13