English
Problems
3. Display position is incorrect.
4. The screen is too bright or too dark.
5. Afterimages appear.
6. The screen has defective pixels
(e.g. slightly light or dark).
7. Fingerprints remain on the screen.
8. The screen is flicking or the
position is not proper.
9. The Enter button does not operate.
24
6. TROUBLESHOOTING
Points to check with possible solutions
Adjust the image position using the
<Hor.Position> and <Ver.Position> (p. 16)
If the problem persists, use the graphics board's
utility software to change the display position if
available.
Adjust the Brightness (p. 19) (The baklight of
the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please consult your dealer.)
When the screen image is changed after
displaying the same image for a long period, an
afterimage may appear. The "Afterimage" can
be removed gradually by changing the displayed
image.Use the "Off Timer" function and avoid
keeping the screen on all the time.(p. 17)
This is due to the characteristics of the panel
itself, and not the LCD product.
Leaving the screen white may solve the
problem.
Select the <Screen> in the ScreenManager <Auto
Adjustment> menu. (p. 18)
The adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while
pressing the Enter, switch the power on. (p. 17)